Odin is a very useful tool that communicates with connected Android device (in download mode) and lets you install / flash ROM on your Android device. It’s an internal Samsung tool that is used for flashing firmware on devices. It’s available for Windows only. It’s very important to understand Odin and know about all the options that the program offers. Here is everything you need to know about the tool.
To convert the TWRP recovery.img into recovery.tar.md5 file, use our guide: How to Convert IMG into TAR.md5 file on Android; Now power off your Samsung phone. Besides, boot your phone into download mode. To do so, press and hold the Home button + Power button + Volume down buttons for a few seconds until you see a warning screen. All downloads contain.tar.md5 files flashable in ODIN as PDA. Make sure your device is in ODIN download mode (usually you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin3-v1.85.exe file, press the PDA button, select the.tar.md5 file, and click Start. You can find more detailed. After downloading it (normally a compressed file), you need to extact/unzip it to certain location of your PC. The file types that Odin uses are.bin,.tar and.tar.md5. Find the file you have downloaded and then unzip it to Desktop. You will find a.md5 file after extracting. Download and Install Kies or Samsung USB Driver. Download and extract the latest Odin Flash Tool to your PC and run as administrator. Boot your Samsung Phone or Tablet into Download Mode and connect it to your PC. Check/Tick “Auto Reboot and F.Reset time” checkbox on Odin Options and select PDA AP, browse to your Firmware (.tar.md5) File.
What is Odin?
Odin is a tool developed by Samsung to be used internally. It is used to flash firmware onto Android devices. You can flash .tar, .tar.md5 or .bin firmware files using Odin. There are different versions of Odin available. You can choose one depending on your device.
Understanding Odin Options
First, lets see what does the checkbox options do:
Auto Reboot: This option, when checked, reboots the system automatically after flashing is done.
Re-Partition: So, what does re-partition do in Odin? It repartitions your device filesystem to the default (RFS).
F . Reset Time: It resets the flashing timer after the flash process is complete.
And here is what different buttons mean and what they are used for:
PIT: Partition Information Table. If you checked the “Re-Partition” checkbox, you should also specify a .pit file to repartition the file system.
Bootloader: This button is used to flash the device Bootloader.
PDA: It refers to the firmware build. You can use this button to select the ROM or Kernel that you want to flash on to your device.
Phone: It refers to baseband / modem version.
CSC: Consumer Software Customization. Click this button and select the CSC file. It contains region or carrier specific files and may also include APN / MMS settings for that carrier.
Tar Md5 Download
Please be aware that you need to be very careful while using Odin. Especially with “Re-Partition” option you need to select the right PIT file. If you do not have the right .pit file, do not check “Re-Partition” option as it may brick your phone.
Tar Md5 File Odin
You need to select the right file against each button. Click on the button, browse and select the appropriate file. These files are usually found inside a firmware zip package. If used carefully and in the right way, Odin is very handy tool.